Hacked By AnonymousFox

Current Path : C:/Windows/Boot/PCAT/en-GB/
Upload File :
Current File : C:/Windows/Boot/PCAT/en-GB/bootmgr.exe.mui

MZ@	!L!This program cannot be run in DOS mode.

$ٙ|||.|.|Rich|PELRH"!	Xq@DP%.rsrc@@00H`x8				 P0BF*MUIBOOTMGR.XSL M]*/T4\kU2&XMUIen-GB)#/#X4#W#Y#\#|^#b#d#s#''! N:NH%$BM_MSG_FIRST

The Boot Configuration Data for your PC is missing or contains errors.

|To specify an advanced option for this choice, press F8.

pThere was a problem enumerating global parameters.

LAn unexpected error has occurred.

The application or operating system couldn't be loaded because a required file is missing or contains errors.

The Boot Configuration Data file doesn't contain valid information for an operating system.

xA required device isn't connected or can't be accessed.

A required file couldn't be accessed because your BitLocker key wasn't loaded correctly.

There isn't enough memory available to create a ramdisk device.

The Boot Configuration Data file is missing some required information.

This 64-bit application couldn't load because your PC doesn't have a 64-bit processor. If you're using Windows To Go, make sure your USB device has a version of Windows that's compatible with the PC you're trying to use.

TAn unexpected I/O error has occurred.

The header checksum for this file doesn't match the computed checksum.

|The digital signature for this file couldn't be verified.

There is an invalid object in the Boot Configuration Data store.

BitLocker

PEnter the PIN to unlock this drive

\Incorrect PIN; please enter the PIN again

@Too many PIN entry attempts

TEnter the recovery key for this drive

The last six digits are incorrect; please enter them again

tThe recovery key is incorrect; please enter it again

XEnter the password to unlock this drive

pIncorrect password; please enter the password again

LToo many password entry attempts

lPlug in the USB drive that has the BitLocker key

lThere is no valid BitLocker key on this USB drive

To recover this drive, plug in the USB drive that has the BitLocker recovery key

lThere is no valid recovery key on this USB drive

You must enter your recovery key to access Start-up Settings

Bitlocker needs your recovery key to unlock your drive because

Hyour PC's configuration has changed. This may have happened because a disc or USB device was inserted. Removing it and restarting your PC may fix this problem.

hthe following boot application has changed: %1.

the Boot Configuration Data setting %1 has changed for the following boot application: %2.

|the trusted platform module is not functioning correctly.

\the trusted platform module is disabled.

hthe trusted platform module is not accessible.

xthe partition table reports an invalid partition size.

Ldebugging mode has been enabled.

hdriver signature enforcement has been disabled.

4of an unknown error.

To protect the privacy of your data, BitLocker has prevented the unlocking of your drive. You'll need to enter your recovery key.



pThere is a limit on the number of attempts allowed.

To reboot and try again, press Enter. For other recovery options, press Esc.

|Find the USB drive you used when you turned on BitLocker.

Use the number keys or function keys F1-F10 (use F10 for 0).

lPress the Insert key to see the PIN as you type.

tPress the Insert key to see the password as you type.

lPress the Insert key to hide the PIN as you type.

xPress the Insert key to hide the password as you type.

,Recovery key ID:

$Key filename:

8Press Enter to continue

PPress Enter to reboot and try again

LPress Esc for BitLocker recovery

PPress Esc for more recovery options

\Press Esc or the Windows key for recovery

xPress Esc or the Windows key for more recovery options

pPress F11 to choose an alternative operating system

0BM_FVE_EMPTY_STRING

Secure Boot has been disabled. Either Secure Boot must be re-enabled, or BitLocker must be suspended for Windows to start normally.

dSecure Boot policy has unexpectedly changed.

Device Lock has been triggered due to too many incorrect password attempts.

0BitLocker recovery

`Press Enter or the Windows key to continue

This operating system uses the Physical Address Extension feature to support systems with more than 4 GB of RAM.  You'll need to use a PC with a compatible processor to run the operating system.

lA component of the operating system has expired.

 Please wait

@Preparing Automatic Repair

HPreparing System Image Recovery

<Preparing Command Prompt

<Preparing system restore

Preparing

Hyper-V



,Multicast Server

Preparing

DPreparing BitLocker recovery

The Windows Boot Configuration Data (BCD) file from the PXE server does not contain a valid operating system entry. Ensure that the server has boot images installed for this architecture.

Recovery

PYour PC/Device needs to be repaired

xThere are no more BitLocker recovery options on your PC

xThere was a problem with a device connected to your PC

LYou'll need to use recovery tools. If you don't have any installation media (like a disc or USB device), contact your PC administrator or PC/Device manufacturer.

This problem can happen when a removable storage device is removed while it's in use or is failing. Properly connecting any removable storage and restarting your PC may fix this problem.

|Choose one of the options below to address this problem.

PPress the Windows key for recovery

8Press Esc for recovery

|Press the Windows key to use a different operating system

dPress F9 to use a different operating system

PPress the Windows key to try again

<Press Enter to try again

File:

Source:

Line:

 Error code:

HYour PC couldn't start properly

PYour PC couldn't turn off properly

HPress F8 for Start-up Settings

For more information on how to retrieve this key, go to %1 from another PC or mobile device.

TPress Esc for UEFI Firmware Settings

lPress the Windows key for UEFI Firmware Settings

:(

`http://windows.microsoft.com/recoverykeyfaq

 The entry cannot be launched because it requires system capabilities that are blocked until reboot.  Please reboot the computer or device.

XPress F1 to enter Recovery Environment

4VS_VERSION_INFO
pcE
pcE?StringFileInfo080904B0LCompanyNameMicrosoft CorporationB
FileDescriptionBoot Managern'FileVersion10.0.17763.2928 (WinBuild.160101.0800)8InternalNamebootmgr.exe.LegalCopyright Microsoft Corporation. All rights reserved.@OriginalFilenamebootmgr.exej%ProductNameMicrosoft Windows Operating SystemDProductVersion10.0.17763.2928DVarFileInfo$Translation	<?xml version="1.0" encoding="unicode"?>

<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:osxml="osxml" version="1.0">

<_locDefinition>

      <_locDefault _loc="locData"/>

      <_locTag _locAttrData="pad-left,pad-right">p</_locTag>

      <_locTag _locAttrData="height,width">textarea</_locTag>

      <_locTag _locAttrData="minsize,noindent">select</_locTag>

      <_locTag _locAttrData="size">progressbar</_locTag>

      <_locTag _locAttrData="size,maxlen">input</_locTag>

      <_locTag _locAttrData="value">osxml:update</_locTag>

</_locDefinition>



<xsl:template match="fve-standard-ui">

<osxml:text-mode-ui>

  <head>

    <xsl:for-each select="@footer-multi-continue">

      <meta key="ENTER" action="continue"/>

      <meta key="ESC" action="recovery"/>

      <meta key="F11" action="multi"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-multi-continue-winkey">

      <meta key="ENTER" action="continue"/>

      <meta key="ESC" action="recovery"/>

      <meta key="WINDOWS" action="winrecovery"/>

      <meta key="F11" action="multi"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-continue">

      <meta key="ENTER" action="continue"/>

      <meta key="ESC" action="recovery"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-continue-winkey">

      <meta key="ENTER" action="continue"/>

      <meta key="ESC" action="recovery"/>

      <meta key="WINDOWS" action="winrecovery"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-multi-reboot">

      <meta key="ENTER" action="reboot"/>

      <meta key="ESC" action="recovery"/>

      <meta key="F11" action="multi"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-multi-reboot-winkey">

      <meta key="ENTER" action="reboot"/>

      <meta key="ESC" action="recovery"/>

      <meta key="WINDOWS" action="winrecovery"/>

      <meta key="F11" action="multi"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-reboot">

      <meta key="ENTER" action="reboot"/>

      <meta key="ESC" action="recovery"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-reboot-winkey">

      <meta key="ENTER" action="reboot"/>

      <meta key="ESC" action="recovery"/>

      <meta key="WINDOWS" action="winrecovery"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-continue-only">

      <meta key="ENTER" action="continue"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-continue-only-winkey">

      <meta key="ENTER" action="continue"/>

      <meta key="WINDOWS" action="wincontinue"/>

    </xsl:for-each>

  </head>

</osxml:text-mode-ui>

</xsl:template>



<xsl:template match="fve-legacy-ui">

<osxml:text-mode-ui>

  <head>

    <title color="XXXXRGBX"><xsl:text>                           BitLocker drive encryption                          </xsl:text></title>

    <xsl:for-each select="@footer-multi-continue">

      <footer color="XXXXRGBX"><xsl:text> ENTER=Continue                 F11=OS Selection                  ESC=Recovery </xsl:text></footer>

      <meta key="ENTER" action="continue"/>

      <meta key="ESC" action="recovery"/>

      <meta key="F11" action="multi"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-multi-continue-winkey">

      <footer color="XXXXRGBX"><xsl:text> ENTER=Continue                 F11=OS Selection      WINDOWS KEY/ESC=Recovery </xsl:text></footer>

      <meta key="ENTER" action="continue"/>

      <meta key="ESC" action="recovery"/>

      <meta key="WINDOWS" action="winrecovery"/>

      <meta key="F11" action="multi"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-continue">

      <footer color="XXXXRGBX"><xsl:text> ENTER=Continue                                                   ESC=Recovery </xsl:text></footer>

      <meta key="ENTER" action="continue"/>

      <meta key="ESC" action="recovery"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-continue-winkey">

      <footer color="XXXXRGBX"><xsl:text> ENTER=Continue                                       WINDOWS KEY/ESC=Recovery </xsl:text></footer>

      <meta key="ENTER" action="continue"/>

      <meta key="ESC" action="recovery"/>

      <meta key="WINDOWS" action="winrecovery"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-multi-reboot">

      <footer color="XXXXRGBX"><xsl:text> ENTER=Reboot                   F11=OS Selection                  ESC=Recovery </xsl:text></footer>

      <meta key="ENTER" action="reboot"/>

      <meta key="ESC" action="recovery"/>

      <meta key="F11" action="multi"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-multi-reboot-winkey">

      <footer color="XXXXRGBX"><xsl:text> ENTER=Reboot                   F11=OS Selection      WINDOWS KEY/ESC=Recovery </xsl:text></footer>

      <meta key="ENTER" action="reboot"/>

      <meta key="ESC" action="recovery"/>

      <meta key="WINDOWS" action="winrecovery"/>

      <meta key="F11" action="multi"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-reboot">

      <footer color="XXXXRGBX"><xsl:text> ENTER=Reboot                                                     ESC=Recovery </xsl:text></footer>

      <meta key="ENTER" action="reboot"/>

      <meta key="ESC" action="recovery"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-reboot-winkey">

      <footer color="XXXXRGBX"><xsl:text> ENTER=Reboot                                         WINDOWS KEY/ESC=Recovery </xsl:text></footer>

      <meta key="ENTER" action="reboot"/>

      <meta key="ESC" action="recovery"/>

      <meta key="WINDOWS" action="winrecovery"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-continue-only">

      <footer color="XXXXRGBX"><xsl:text> ENTER=Continue                                                                </xsl:text></footer>

      <meta key="ENTER" action="continue"/>

    </xsl:for-each>

    <xsl:for-each select="@footer-continue-only-winkey">

      <footer color="XXXXRGBX"><xsl:text> WINDOWS KEY/ENTER=Continue                                                    </xsl:text></footer>

      <meta key="ENTER" action="continue"/>

      <meta key="WINDOWS" action="wincontinue"/>

    </xsl:for-each>

  </head>

  <body background-color="XXXX" foreground-color="RGBX">

    <br/>

    <b>

      <xsl:for-each xmlns:xsl="http://www.w3.org/1999/XSL/Transform" select="fve-title-select">

      <textarea name="fve-title"><xsl:value-of select="@title"/></textarea>

      </xsl:for-each>

    </b>

    <br/>

    <xsl:for-each select="@fve-input-select">

      [<textarea name="fve-input" width="55" height="1">

      </textarea>]

    </xsl:for-each>

    <xsl:for-each select="fve-recovery-select">

      <br/>

      <br/>

      <textarea name="fve-recovery-info" height="5">

        <xsl:value-of select="@recovery-text"/>

      </textarea>

    </xsl:for-each>

    <xsl:for-each select="fve-recovery-help-select">

      <br/>

      <br/>

      <textarea name="fve-recovery-help" height="3">

         <xsl:value-of select="@recovery-help-text"/>

      </textarea>

    </xsl:for-each>

    <xsl:for-each select="fve-error-select">

      <br/>

      <br/>

      <textarea name="fve-error-info" height="4">

        <xsl:value-of select="@error-text"/>

      </textarea>

    </xsl:for-each>

    <xsl:for-each select="fve-help-select">

        <br/>

        <br/>

        <textarea name="fve-help-info" height="3">

          <xsl:value-of select="@help-text"/>

        </textarea>

        <br/>

        <textarea name="fve-help-info-showhide">

          <xsl:value-of select="@showhide-text"/>

        </textarea>

        <br/>

        <xsl:value-of select="@passwordid-text"/>

        <br/>

        <xsl:value-of select="@volumeid-text"/>

        <br/>

        <xsl:value-of select="@keyfile-text"/>

    </xsl:for-each>

  </body>

</osxml:text-mode-ui>

</xsl:template>



<xsl:template match="fve-title-update">

  <osxml:update control="fve-title" value="{@value}"/>

</xsl:template>



<xsl:template match="fve-help-info-showhide-update">

  <osxml:update control="fve-help-info-showhide" value="{@value}"/>

</xsl:template>



<xsl:template match="osboot-error-standard">

<osxml:text-mode-ui>

  <head>

    <xsl:for-each select="@advanced-options">

      <meta key="F8" action="advops"/>

      <meta key="F10" action="bootops"/>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-recovery-oem">

        <meta key="WINDOWS" action="recoveroem"/>

    </xsl:for-each>

    <xsl:for-each select="@keyboard-recovery-oem">

        <meta key="ESC" action="recoveroem"/>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-recovery">

        <meta key="WINDOWS" action="recover"/>

    </xsl:for-each>

    <xsl:for-each select="@keyboard-recovery">

        <meta key="ESC" action="recover"/>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-multi">

        <meta key="WINDOWS" action="nextos"/>

    </xsl:for-each>

    <xsl:for-each select="@keyboard-multi">

        <meta key="F9" action="nextos"/>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-tryagain">

        <meta key="WINDOWS" action="tryagain"/>

    </xsl:for-each>

    <xsl:for-each select="@keyboard-tryagain">

        <meta key="ENTER" action="tryagain"/>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-firmware">

        <meta key="WINDOWS" action="firmware"/>

    </xsl:for-each>

    <xsl:for-each select="@keyboard-firmware">

        <meta key="ESC" action="firmware"/>

    </xsl:for-each>

    <xsl:for-each select="@keyboard-recoversys">

        <meta key="F1" action="recoversys"/>

    </xsl:for-each>

    <xsl:for-each select="@noaction">

    </xsl:for-each>

  </head>

</osxml:text-mode-ui>

</xsl:template>



<xsl:template match="osboot-error-legacy">

<osxml:text-mode-ui>

  <head>

    <xsl:for-each select="@nowds">

     <title color="XXXXRGBX"><xsl:text>                            Windows Boot Manager                               </xsl:text></title>

    </xsl:for-each>

    <xsl:for-each select="@wds">

     <title color="XXXXRGBX"><xsl:text>               Windows Boot Manager (Server IP: <xsl:value-of select="."/>)               </xsl:text></title>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-recovery-oem">

        <footer color="XXXXRGBX"><xsl:text> WINDOWS KEY=Recovery                                                          </xsl:text></footer>

        <meta key="WINDOWS" action="recoveroem"/>

        <meta key="F8" action="advops"/>

        <meta key="F10" action="bootops"/>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-recovery">

        <footer color="XXXXRGBX"><xsl:text> WINDOWS KEY=Recovery                                                          </xsl:text></footer>

        <meta key="WINDOWS" action="recover"/>

        <meta key="F8" action="advops"/>

        <meta key="F10" action="bootops"/>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-norecovery-multi">

        <footer color="XXXXRGBX"><xsl:text> WINDOWS KEY=Next OS                                                           </xsl:text></footer>

        <meta key="WINDOWS" action="nextos"/>

        <meta key="F8" action="advops"/>

        <meta key="F10" action="bootops"/>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-norecovery-firmware">

        <footer color="XXXXRGBX"><xsl:text> WINDOWS KEY=UEFI Firmware Settings                                            </xsl:text></footer>

        <meta key="WINDOWS" action="firmware"/>

        <meta key="F8" action="advops"/>

        <meta key="F10" action="bootops"/>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-norecovery-tryagain">

        <footer color="XXXXRGBX"><xsl:text> WINDOWS KEY=Try Again                                                         </xsl:text></footer>

        <meta key="WINDOWS" action="tryagain"/>

        <meta key="F8" action="advops"/>

        <meta key="F10" action="bootops"/>

    </xsl:for-each>

    <xsl:for-each select="@recovery-oem">

        <footer color="XXXXRGBX"><xsl:text> ENTER=OS Selection                                               ESC=Recovery </xsl:text></footer>

        <meta key="ENTER" action="osselection"/>

        <meta key="ESC" action="recoveroem"/>

    </xsl:for-each>

    <xsl:for-each select="@recovery">

        <footer color="XXXXRGBX"><xsl:text> ENTER=OS Selection                                               ESC=Recovery </xsl:text></footer>

        <meta key="ENTER" action="osselection"/>

        <meta key="ESC" action="recover"/>

    </xsl:for-each>

    <xsl:for-each select="@norecovery">

        <footer color="XXXXRGBX"><xsl:text> ENTER=OS Selection                                                            </xsl:text></footer>

        <meta key="ENTER" action="osselection"/>

    </xsl:for-each>

    <xsl:for-each select="@norecovery-firmware">

        <footer color="XXXXRGBX"><xsl:text> ENTER=OS Selection                                 ESC=UEFI Firmware Settings </xsl:text></footer>

        <meta key="ENTER" action="osselection"/>

        <meta key="ESC" action="firmware"/>

    </xsl:for-each>

    <xsl:for-each select="@nokeyboard-firmware-only">

        <footer color="XXXXRGBX"><xsl:text>                                            WINDOWS_KEY=UEFI Firmware Settings </xsl:text></footer>

        <meta key="WINDOWS" action="firmware"/>

    </xsl:for-each>

    <xsl:for-each select="@keyboard-firmware-only">

        <footer color="XXXXRGBX"><xsl:text>                                                    ESC=UEFI Firmware Settings </xsl:text></footer>

        <meta key="ESC" action="firmware"/>

    </xsl:for-each>

    <xsl:for-each select="@noaction">

        <footer color="XXXXRGBX"><xsl:text>                                                                               </xsl:text></footer>

    </xsl:for-each>

  </head>

  <body background-color="XXXX" foreground-color="RGBX">

  <br/>

  <xsl:for-each select="@generic-help">

  Windows failed to start. A recent hardware or software change might be the cause.

  To fix the problem:

  <br/>

  <br/>

  <p pad-left="2">1. Insert your Windows installation disc and restart your computer.</p>

  <p pad-left="2">2. Choose your language settings, and then click "Next."</p>

  <p pad-left="2">3. Click "Repair your computer."</p>

  <br/>

  If you do not have this disc, contact your system administrator or computer

  manufacturer for assistance.

  </xsl:for-each>

  <xsl:for-each select="@hash-help">

  A recent hardware or software change might have installed a file that is signed incorrectly or

  damaged, or that might be malicious software from an unknown source.

  <br/>

  <br/>

  If you have a Windows installation disc, insert the disc and restart your computer. Click

  "Repair  your computer," and then choose a recovery tool.

  <br/>

  <br/>

  Otherwise, to start Windows so you can investigate further, press the ENTER key to display the boot

  menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the

  digital signature cannot be verified and want to start Windows without this file, temporarily

  disable driver signature enforcement.

  </xsl:for-each>

  <xsl:for-each select="@io-help">

  Windows has encountered a problem communicating with a device connected to your computer.

  <br/>

  <br/>

  This error can be caused by unplugging a removable storage device such as an external USB drive

  while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is

  failing. Make sure any removable storage is properly connected and then restart your computer.

  <br/>

  <br/>

  If you continue to receive this error message, contact the hardware manufacturer.

  </xsl:for-each>

  <br/>

  <br/>

  <p pad-left="4" pad-right="4">

    <xsl:for-each select="@file">

    <xsl:text>File:   </xsl:text>

    </xsl:for-each>

    <font foreground-color="RGBI"><xsl:value-of select="@file"/></font>

    <br/>

    <xsl:for-each select="@source">

      Source:

    </xsl:for-each>

    <font foreground-color="RGBI"><xsl:value-of select="@source"/></font>

    <br/>

    <xsl:for-each select="@status">

      Status:

    </xsl:for-each>

    <font foreground-color="RGBI"><xsl:value-of select="@status"/></font>

    <br/>

    <xsl:for-each select="@line">

      Line:

    </xsl:for-each>

    <font foreground-color="RGBI"><xsl:value-of select="@line"/></font>

    <br/>

    <xsl:for-each select="@info">

      Info:

    </xsl:for-each>

    <font foreground-color="RGBI"><textarea height="3"><xsl:value-of select="@info"/></textarea></font>

    </p>

  </body>

</osxml:text-mode-ui>

</xsl:template>



<xsl:template match="osboot-list-tools">

<osxml:text-mode-ui>

  <head>

    <xsl:for-each select="@nowds">

     <title color="XXXXRGBX"><xsl:text>                            Windows Boot Manager                               </xsl:text></title>

    </xsl:for-each>

    <xsl:for-each select="@wds">

     <title color="XXXXRGBX"><xsl:text>               Windows Boot Manager (Server IP: <xsl:value-of select="."/>)               </xsl:text></title>

    </xsl:for-each>

    <footer color="XXXXRGBX"><xsl:text> ENTER=Choose                    TAB=Menu                           ESC=Cancel </xsl:text></footer>

    <meta key="ENTER" action="submit"/>

    <meta key="ESC" action="exit"/>

    <meta key="F8" action="advops"/>

    <meta key="F8" action="submit"/>

    <meta key="F10" action="bootops"/>

    <meta key="F10" action="submit"/>

    <meta key="OEMKEY" action="oem"/>

    <xsl:for-each select="@timeout">

      <meta key="ANY" action="anykey"/>

      <meta event="TIMEOUT" action="submit"/>

      <timer initial="{.}" control="timerval"/>

    </xsl:for-each>

  </head>

  <body background-color="XXXX" foreground-color="RGBX">

  <br/>

  <font foreground-color="RGBI">

  Choose an operating system to start, or press TAB to select a tool:

  </font>

  <br/>

  (Use the arrow keys to highlight your choice, then press ENTER.)

  <br/>

  <br/>

  <form>

  <p pad-left="0" pad-right="8">

    <select name="osboot-selection" minsize="6" tip-target="advops-prompt" right-justify="true" show-arrows="true" noindent="false">

      <xsl:for-each select="osboot-entry">

        <xsl:element name="option">

          <xsl:for-each select="@default">

            <xsl:attribute name="selected">true</xsl:attribute>

          </xsl:for-each>

        <xsl:attribute name="value"><xsl:value-of select="@value"/></xsl:attribute>

        <xsl:attribute name="tip"><xsl:value-of select="@tip"/></xsl:attribute>

        <xsl:attribute name="carat"><xsl:value-of select="@carat"/></xsl:attribute>

          <xsl:value-of select="@name"/>

          <xsl:for-each select="@ems"> [EMS Enabled]</xsl:for-each>

          <xsl:for-each select="@debugger"> [debugger enabled]</xsl:for-each>

        </xsl:element>

      </xsl:for-each>

    </select>

    <br/>

    </p>

    <font foreground-color="RGBI">

    <textarea name="advops-prompt" width="76" height="1"/>

    </font>

    <br/>

    <xsl:for-each select="@timeout">

      <textarea name="timerstr" width="68">Seconds until the highlighted choice will be started automatically: </textarea><textarea name="timerval" width="8"/>

    </xsl:for-each>

    <br/>

    <br/>

    <br/>

    <br/>

    <font foreground-color="RGBI">

    Tools:

    </font>

    <br/>

    <br/>

    <p pad-left="0" pad-right="8">

     <select name="osboot-tool-selection" minsize="3" tip-target="advops-prompt" show-arrows="true" right-justify="true">

      <xsl:for-each select="osboot-tool">

        <xsl:element name="option">

          <xsl:for-each select="@default">

            <xsl:attribute name="selected">true</xsl:attribute>

          </xsl:for-each>

        <xsl:attribute name="value"><xsl:value-of select="@value"/></xsl:attribute>

       <xsl:attribute name="tip"><xsl:value-of select="@tip"/></xsl:attribute>

        <xsl:value-of select="@name"/>

        </xsl:element>

      </xsl:for-each>

    </select>

    </p>

  </form>

  </body>

</osxml:text-mode-ui>

</xsl:template>



<xsl:template match="osboot-list">

<osxml:text-mode-ui>

  <head>

    <xsl:for-each select="@nowds">

     <title color="XXXXRGBX"><xsl:text>                            Windows Boot Manager                               </xsl:text></title>

    </xsl:for-each>

    <xsl:for-each select="@wds">

     <title color="XXXXRGBX"><xsl:text>               Windows Boot Manager (Server IP: <xsl:value-of select="."/>)               </xsl:text></title>

    </xsl:for-each>

    <footer color="XXXXRGBX"><xsl:text> ENTER=Choose                                                         ESC=Exit </xsl:text></footer>

    <meta key="ENTER" action="submit"/>

    <meta key="ESC" action="exit"/>

    <meta key="F8" action="advops"/>

    <meta key="F8" action="submit"/>

    <meta key="F10" action="bootops"/>

    <meta key="F10" action="submit"/>

    <meta key="OEMKEY" action="oem"/>

    <xsl:for-each select="@timeout">

      <meta key="ANY" action="anykey"/>

      <meta event="TIMEOUT" action="submit"/>

      <timer initial="{.}" control="timerval"/>

    </xsl:for-each>

  </head>

  <body background-color="XXXX" foreground-color="RGBX">

  <br/>

  <font foreground-color="RGBI">

  Choose an operating system to start:

  </font>

  <br/>

  (Use the arrow keys to highlight your choice, then press ENTER.)

  <br/>

  <br/>

  <p pad-left="0" pad-right="8">

  <form>

    <select name="osboot-selection" minsize="10" tip-target="advops-prompt" right-justify="true" show-arrows="true" noindent="false">

      <xsl:for-each select="osboot-entry">

        <xsl:element name="option">

          <xsl:for-each select="@default">

            <xsl:attribute name="selected">true</xsl:attribute>

          </xsl:for-each>

        <xsl:attribute name="value"><xsl:value-of select="@value"/></xsl:attribute>

        <xsl:attribute name="tip"><xsl:value-of select="@tip"/></xsl:attribute>

        <xsl:attribute name="carat"><xsl:value-of select="@carat"/></xsl:attribute>

          <xsl:value-of select="@name"/>

          <xsl:for-each select="@ems"> [EMS Enabled]</xsl:for-each>

          <xsl:for-each select="@debugger"> [debugger enabled]</xsl:for-each>

        </xsl:element>

      </xsl:for-each>

    </select>

  </form>

  <br/>

  </p>

  <font foreground-color="RGBI">

  <textarea name="advops-prompt" width="76" height="1"/>

  </font>

  <br/>

  <xsl:for-each select="@timeout">

    <textarea name="timerstr" width="68">Seconds until the highlighted choice will be started automatically: </textarea><textarea name="timerval" width="8"/>

  </xsl:for-each>

  <br/>

  </body>

</osxml:text-mode-ui>

</xsl:template>



<xsl:template match="timeout-cancel">

  <osxml:update disable-timer="true"/>

  <osxml:update control="timerval" value=""/>

  <osxml:update control="timerstr" value=""/>

</xsl:template>



<xsl:template match="progress-bar">

  <osxml:text-mode-ui>

    <body background-color="XXXX" foreground-color="RGBX">

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <br/>

    <p pad-left="2">

      <textarea name="progress-title" width="76">

        <xsl:value-of select="@progresstitle"/>

      </textarea>

    </p>

    <br/>

    <p pad-left="2">Loading files...</p>

    <br/>

    <meter name="progressbar" size="76"/>

    <p pad-left="2">

      <textarea name="progressinfo" width="76"/>

    </p>

    </body>

  </osxml:text-mode-ui>

</xsl:template>



<xsl:template match="progress-update">

  <osxml:update control="progressbar" value="{@value}"/>

</xsl:template>



<xsl:template match="progress-info">

  <osxml:update control="progressinfo" value="{@value}"/>

</xsl:template>



<xsl:template match="multicast-prestart-standard">

<osxml:text-mode-ui>

  <head>

    <meta key="ESC" action="exit"/>

  </head>

</osxml:text-mode-ui>

</xsl:template>



<xsl:template match="multicast-prestart-legacy">

<osxml:text-mode-ui>

  <head>

    <xsl:for-each select="@wds">

     <title color="XXXXRGBX"><xsl:text>               Windows Boot Manager (Server IP: <xsl:value-of select="."/>)               </xsl:text></title>

    </xsl:for-each>

    <footer color="XXXXRGBX"><xsl:text> ESC=Exit                                                                      </xsl:text></footer>

    <meta key="ESC" action="exit"/>

  </head>

  <body background-color="XXXX" foreground-color="RGBX">

  <br/>

  <font foreground-color="RGBI">

  Waiting for Multicast session to start: <textarea name="activity" width="1"/>

  </font>

  <br/>

  </body>

</osxml:text-mode-ui>

</xsl:template>



<xsl:template match="multicast-activity-update">

  <osxml:update control="activity" value="{@value}"/>

</xsl:template>



<xsl:template match="bootmgr">

<osxml:text-mode-ui>

  <head>

    <meta key="ANY" action="anykey"/>

    <meta key="F8" action="advops"/>

    <meta key="F10" action="bootops"/>

    <meta key="OEMKEY" action="oem"/>

  </head>

</osxml:text-mode-ui>

</xsl:template>



<xsl:template match="bootmgr-clear-screen">

<osxml:text-mode-ui>

  <body background-color="XXXX" foreground-color="RGBX">

  <br/>

  </body>

</osxml:text-mode-ui>

</xsl:template>



<xsl:template match="*|@*|text()"/>



</xsl:stylesheet>

PAPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADDINGPADDINGXXPADP%0%C	*H
%40%010
	`He0\
+7N0L0
+70	010
	`He =?3<d(~-q?m	_*H
003<j{E<0
	*H
010	UUS10U
Washington10URedmond10U
Microsoft Corporation1.0,U%Microsoft Windows Production PCA 20110
210902182341Z
220901182341Z0p10	UUS10U
Washington10URedmond10U
Microsoft Corporation10UMicrosoft Windows0"0
	*H
0
-[2_L%:<"$s Sdpj1Iv)>Ubѩk1lhfK<͐53lߧ`pG`\[qyGlŪS-1s8ۆ[l^1Xr~U{2/Z:n&ӟ*{6|0p]v'Q)%ZAvmy$uiT:ך\WR%RSמo0~0U%0
+7
+0UH:C@ԫyx҉2y80TUM0KI0G1-0+U$Microsoft Ireland Operations Limited10U
229879+4675800U#0)9ėx͐O|US0TUM0K0IGEChttp://www.microsoft.com/pkiops/crl/MicWinProPCA2011_2011-10-19.crl0a+U0S0Q+0Ehttp://www.microsoft.com/pkiops/certs/MicWinProPCA2011_2011-10-19.crt0U00
	*H
iEt,@8ߞ".'F58cHk\PZ$31ܲ~7Zof1G!WaNja̦HjwL׈jbUt稞ʴĘ_VVkT^r|B<H`:fuqCL?E>U#Jx \F0*wh=+a$8-@k(ouOi@Y q8^Щ8{RqtcEP38UWNZ= Z8
t?@}|00
avV0
	*H
010	UUS10U
Washington10URedmond10U
Microsoft Corporation1200U)Microsoft Root Certificate Authority 20100
111019184142Z
261019185142Z010	UUS10U
Washington10URedmond10U
Microsoft Corporation1.0,U%Microsoft Windows Production PCA 20110"0
	*H
0
.	i!i33T ҋ8-|byJ?5 pk6u1ݍp7tF([`#,GgQ'rɹ;S5|'#	oFn<Aˣ?]jMi%(\6C
[''x0[*	k"S`,hSIah	sD]}T+y5]l+\μ#on&6O'2;A,wTN\eCmwZ$HC0?0	+70U)9ėx͐O|US0	+7
SubCA0U0U00U#0Vˏ\bh=[Κ0VUO0M0KIGEhttp://crl.microsoft.com/pki/crl/products/MicRooCerAut_2010-06-23.crl0Z+N0L0J+0>http://www.microsoft.com/pki/certs/MicRooCerAut_2010-06-23.crt0
	*H
|qQyn9><Rn+?shH4M&1Fay8.Ek(	L
6fj@26vZƿӬhbTlP0X|N|sWR!s4ZV	~?rSc=1e=BА_TGosNA@_*s!(s9_>\`	QfG=*hwLb{Ǻz4KbzJ7-W|=ܸZij:ni!7ށugӓW^)9-Es[zFX^gl5?$5
uVx,Јߺ~,c#!xlX6+̤-@EΊ\k>p*
j_Gc
26*pZBYqKW~!<ŹE ŕ]b֠c uw}=EWo3wbY~100010	UUS10U
Washington10URedmond10U
Microsoft Corporation1.0,U%Microsoft Windows Production PCA 20113<j{E<0
	`He0	*H
	1
+70
+710
+70/	*H
	1" l\İ9yy3H!!LGwa.q0<
+7
1.,DoAOwwDTNsZPDldNw1RUJSAIGv4Me4hbupbp2iAZ17Q=0Z
+71L0J$"Microsoft Windows" http://www.microsoft.com/windows0
	*H
+
0NZBaZ[2U\ p^y+aJب櫁P'*gR#\2tѾj,TP	`!/	Є`ȮjN_GRC,bypBꓸֲߤ͏K4M?u;`FDD)1ð8kYޑ'I0Ѭ[Sr;BsōS`+]Nm:-wIlŘ
Wߝ5_0
+710	*H
010
	`He0Q*H
	@<08
+Y
010
	`He t|aCA<ڲ{͒\",bi20220504064015.476Z0Ф010	UUS10U
Washington10URedmond10U
Microsoft Corporation1%0#UMicrosoft America Operations1&0$UThales TSS ESN:D6BD-E3E7-16851%0#UMicrosoft Time-Stamp ServiceT003-1Z0
	*H
0|10	UUS10U
Washington10URedmond10U
Microsoft Corporation1&0$UMicrosoft Time-Stamp PCA 20100
211202190520Z
230228190520Z010	UUS10U
Washington10URedmond10U
Microsoft Corporation1%0#UMicrosoft America Operations1&0$UThales TSS ESN:D6BD-E3E7-16851%0#UMicrosoft Time-Stamp Service0"0
	*H
0
\Hu6^EM"jS]pZfszUKP;1Oxy01Դ#TڪgMT"g@W"4{~YwFL{ì2kj8O23RtхpQз|-O C5ϢY$T2hM:ˊpa }3zwkбAr]9{}Mͩ_˻0>aF`%7=cͻ%˘b(uN`XTDOa
"cDMG4ePp9R$xVa2P|γn8mGØ?0^]HtӪ,aP>Zw8_nɘ?ۼKg+pKcSĥkcXiaϡri]Be28ri7aӳ[
-9RcusJMIU{5q6020Uh>u>$I:de0U#0]^b]eS5r0_UX0V0TRPNhttp://www.microsoft.com/pkiops/crl/Microsoft%20Time-Stamp%20PCA%202010(1).crl0l+`0^0\+0Phttp://www.microsoft.com/pkiops/certs/Microsoft%20Time-Stamp%20PCA%202010(1).crt0U00U%0
+0
	*H
TU`M>ۄ+YT˪4aUDNTa3Ko,Nv'3yQKYaj~f9OWdz9!aY9Ar·yg/䩧	R7YtPBG܅*G7D6*04@x?6
QxN{߱'sl3BjyItJVC^Rv+LXZx*#+	ámfkJx^w 2ffhS"/`w/{ٯW;W/GeGALARc-QvGU<]UXPEfG~FuN[vVF0jjʋp>`bo_X`pb'kd6BdXh)[XbpN#ڎ2uo-A^oCFr{	`_dz6K[p&/W}Tq{ڻπB&d5zqz~DZ^혅g^3qS$jl4!0q0Y3kI0
	*H
010	UUS10U
Washington10URedmond10U
Microsoft Corporation1200U)Microsoft Root Certificate Authority 20100
210930182225Z
300930183225Z0|10	UUS10U
Washington10URedmond10U
Microsoft Corporation1&0$UMicrosoft Time-Stamp PCA 20100"0
	*H
0
Lr!y$yՂҩlNu5WlJ⽹>`3\OfSqZ~JZ6gF#w2`}jRDFkvPDq\Q17
8n&S|9azĪri65&dژ;{3[~Rb%j]SVMݼ㑏9,Qpi
6-p15(㴇$ɏ~TUmh;Fz)7EFn20\O,b͹⍈䖬Jq[g`= s}AFu_4 }~ٞE߶r/}_۪~66L+nQsM7t4G|?Lۯ^s=CN39LBh.QFѽjZasg^(v3rק 
co6d[!]_0tعPa65Gk\RQ]%PzlrRą<7?xE^ڏriƮ{>j.00	+70#	+7*RdĚ<F5)/0U]^b]eS5r0\U U0S0Q+7L}0A0?+3http://www.microsoft.com/pkiops/Docs/Repository.htm0U%0
+0	+7
SubCA0U0U00U#0Vˏ\bh=[Κ0VUO0M0KIGEhttp://crl.microsoft.com/pki/crl/products/MicRooCerAut_2010-06-23.crl0Z+N0L0J+0>http://www.microsoft.com/pki/certs/MicRooCerAut_2010-06-23.crt0
	*H
U}*,g1$[rKo\>NGdx=139q6?dl|u9m1lѡ"fg:SMݘx6.Vi	{jo)n?Humm#TxSu$Wݟ=heV(U'$@]='@8)üTBjBRu6as.,k{n?,	x鑲[It쑀=J>f;O2ٖtLrou04zP
X@<TmctH,NG-qd$smʎ	WITds[DZk
(g($8Kn!TkjEG^OLvWT	iD~|als
Af=iAI~~;>1Q{p(6ںL
4$5g+
挙"'B=%tt[jў>~13}{8pDѐȫ::bpcSMmqjU3Xpf040Ф010	UUS10U
Washington10URedmond10U
Microsoft Corporation1%0#UMicrosoft America Operations1&0$UThales TSS ESN:D6BD-E3E7-16851%0#UMicrosoft Time-Stamp Service#
0+9[?ދ_B0~0|10	UUS10U
Washington10URedmond10U
Microsoft Corporation1&0$UMicrosoft Time-Stamp PCA 20100
	*H
*F0"20220504062510Z20220505062510Z0t0:
+Y
1,0*0
*F00W0
{06
+Y
1(0&0
+Y

0 
00
	*H

Ⱥ-
7Pf6?͂7 ɔxnjŗu@L=X4No&./*DJ6jNI"<&6C8!{4c+t(a*p`oLX@1
0	00|10	UUS10U
Washington10URedmond10U
Microsoft Corporation1&0$UMicrosoft Time-Stamp PCA 20103-1Z0
	`HeJ0	*H
	1
*H
	0/	*H
	1" TO;xcBtIG*0*H
	/1000 V2"\OfBn
EWJo<00~0|10	UUS10U
Washington10URedmond10U
Microsoft Corporation1&0$UMicrosoft Time-Stamp PCA 20103-1Z0" 7X=J3i)xZ.Ǎ0
	*H
DXHEx?AE]NDGZn;x܉E9Z2p1&Ҭd	P4r5Uq)pV&)!T?Fj">ej
'4u?@:R*<G$Vgcb;ppu+Uo-$|E骕3aq,:bȼƫTr#HSY7f	I~P=R\$gY8A\1]aAoպW;[F-ѿ)op$O0X>X7rz!/'!)Lh,-W*.*>Q/X2\o~hX=bLHaۏB~KCB-b|%Nsb)T&rH_\cD2so\}<Z,QI<-YDv~:`cucUΘ

Hacked By AnonymousFox1.0, Coded By AnonymousFox